In this article, we are going to go over the main types of paints you can use for your kits: acrylic, enamel, and lacquer, as well as certain basic concepts you need to know such as mixing ratios for airbrushing and the difference between drying and curing. Acrylic paints are…
Tools Required: Respirator, Spray Booth, Spray Can Primer, Aerosol Spray Paint Applicator, Alligator Clips, Wooden Skewers, Styrofoam Boards. Now that you have finished building and modifying your kits you may want to paint it because you are not satisfied with the colors of the plastic, you may want to create a…
Originally written by Virgil Romero. Hey guys! It's been a while since Otakuthon, I was having technical issues from my GPU and was having problems in my private life ever since I got back. But we do our best to provide you (Our favourite readers in the entire universe ^_^)…
Hello again everyone. As I have mentioned in my previous articles, I would like to take you along the journey I usually take when I build a kit. From the assembly, modding, priming, painting and finishing stages. That being said, in order to properly prime and paint, you have to…
The final stretch! The remaining stages of this build were pretty straight forward so I did not include a step by step process. Here you see the two “Amfortas” plasma beam cannons and their respective wings built. I really like their design. What is interesting to note here is that…
Hello again. Let’s pick up where we left off last time. As you can see here, I went ahead and built the Saviour’s arms and shoulders. The assembly was pretty straight forward and did not involve anything out of the ordinary. That is why I do not show a step…
Hello again folks! Today we are going to continue where we left off in the last article. The goal is to finish the chest before we move on to the other limbs of the Saviour Gundam. As you can see here, the grey piece is the cockpit hatch and it…
Hello again. I would like to show you the process I go through when I build a kit. For this series of articles we are going to focus on a straight build for the time being. For those of you who do not know, a straight build is building and…